Shopping for the holidays? Check our Signal Booster Gift Guide.
The WilsonPro IoT 5-Band is the #1 option for improved 5G, 4G, and LTE cell signal for M2M and IoT devices. No matter the frequency, the WilsonPro IoT 5-Band reduces lag times, dropped transactions, and customer dissatisfaction.
Whether you use Verizon, AT&T, or T-Mobile for your IoT devices, the WilsonPro IoT 5-Band will allow consistent data collection, reliable monitoring, and more revenue collection options. This affordable repeater can be integrated quickly into any existing system.
Amplify low-band 5G and 4G for numerous IoT devices, including:
If you own any of these devices and they struggle to receive consistent cellular signal, an IoT 5-Band will help.
We offer three kits for the WilsonPro IoT 5-Band. These include:
Pick the one which best suits your needs. If you need help deciding, give us a call at 1-800-919-7442.
Install with an existing cell phone signal booster, or install as a standalone solution. Pairs well with cellular routers, which can be used to reliably broadcast WiFi through an area. It even works outdoors, unlike most other cellular signal booster options.
| SKU |
460119 (basic kit) 460219 (12V hardwire kit) 461119 (security) |
| Frequency |
Band 12 700 MHz Band 13 700 MHz Band 5 850 MHz Band 4 1700/2100 MHz Band 25/2 1900 MHz |
| Max Gain | 15 dB |
| Max Uplink Power | 24 dBm |
| Max Downlink Power | -3 dBm |
| Impedance | 50 Ohm |
| Power | 460119 & 461119: 110/240 Vac, 50Hz/60Hz,
5Vdc @ 5A 460219: 12 to 14Vdc, 5Vdc @ 5A |
| Connectors | SMA Female |
| Booster Dimensions | 1.25 x 3.5 x 6.25 in |
| Booster Weight | 1.085 lbs |
| UPC |
460119 - 811815020776 460219 - 811815026549 461119 - 811815026105 |
| FCC NOTICE | This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by FCC or a licensed wireless service provider. |
| WARNING: California's Proposition 65 | This product can expose you to chemicals including Nickel (Metallic) which is known to the State of California to cause cancer and Bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/. |
The external adapter plugs into the included antenna extension cable and directly into a socket on the cellular device. The provided donor antenna is placed atop or near the machine to pull in the existing signal, where it is brought to the booster, where it is amplified up to 32X.
The Signal 4G acts as a booster between your device and a cellular modem, providing uninterrupted signal.
The WilsonPro IoT 5-Band will not get your phone better service, as it is designed to be directly connected to an IoT device.
If you’re looking for a phone to improve cell service in a home or vehicle, see our weBoost consumer cell phone signal boosters, or our WilsonPro enterprise signal booster line.
The booster is direct-connect, meaning it plugs directly into any smart device. The booster brings in existing low-band 5G and 4G LTE signal using its external antenna, boosts it, then transmits it to the device via the direct connection.
This dramatically improves
Here are a few additional features of the IoT 5-Band
