The weBoost Drive Reach RV is weBoost’s flagship cell phone signal booster for RVs. This 5G ready booster is very customizable, allowing for numerous setups including hardwiring and a myriad of antenna setups for your ride.
The Drive Reach RV boosts multiple devices at once, allowing everyone in your RV or mobile home to enjoy crisp, clear cellular signal. It has incredible range, and will work on even the most rural of roads and highways.
Please call us at 1-800-568-2723 for a free consultation and answers to any other questions you might have.
Vehicle signal booster installation is simple:
- Attach the hard-mounted antenna on the opposite end of the RV from where you plan to place the indoor antenna.
- Run the cable inside the RV, either through a window or in the same area you might run a TV antenna through.
- Place the amplifier under the driver’s seat.
- Place the interior desktop antenna where needed, with as much separation as possible from the hard mounted antenna.
- Plug power supply into power source or attach to power source (if hardwired).
- Enjoy your booster!
Any questions about installation? Please call us at 1-800-568-2723 for a free consultation and answers to any other questions you might have.
The weBoost Drive Reach RV is optimized for RVs, but will work in any vehicle or indoor location. It is designed for use while moving or in the cabin of an RV, camper, mobile home, or trailer.
It cannot be used outdoors.
Please call us at 1-800-568-2723 for a free consultation and answers to any other questions you might have.
Green
Everything is working perfectly. Your signal booster is amplifying at maximum capacity.
Red
Your outside antenna is pulling in signal from your inside antenna instead of the cell tower. This is called a feedback loop or oscillation. Call your installer to get this fixed.
Orange
The outside antenna is pulling in too much signal from the cell tower. To avoid overloading, your amplifier has to shut down. This can be solved with a small adjustment to your outside antenna. Point it slightly away from the cell tower. Do this in small increments. Make sure to power off, power on your booster to ensure the amplifier is updating the light status. Green is a go.
Green & Red (Blinking)
Your outside antenna is pulling in signal from the cell tower AND your inside antenna. Your amplifier still works, but it's operating at reduced power. Call your installer if you see this problem.
Green & Orange (Blinking)
Your outside antenna is pulling in too much signal from the cell tower. It isn't enough to overload the amplifier, but it's operating at reduced power. This can be solved with a small adjustment to your outside antenna. Point it slightly away from the cell tower. Do this in small increments. Make sure to power off, power on your booster to ensure the amplifier is updating the light status. Green is a go.
Please call us at 1-800-568-2723 for a free consultation and answers to any other questions you might have.
The booster amplifies the signal reaching your phone at the source, so your phone doesn’t need to "connect" to anything. It isn’t a WiFi router – if your phone can detect cellular signal, then it will pick up the amplified signal the booster emits.
Please call us at 1-800-568-2723 for a free consultation and answers to any other questions you might have.
Get the OpenSignal app if you have an iPhone, or the Network Cell Info Lite app for Android, and get reading your signal strength in standard dB (decibel) measurement. The closer to 0 your number, the stronger your signal.
Please call us at 1-800-568-2723 for a free consultation and answers to any other questions you might have.
If you decide to return your weBoost Drive Reach RV within the 90 day window, simply unplug the amplifier from the cables and email (sales@wilsonamplifiers.com) or call us (1-800-568-2723). We'd be happy to help with the refund process. We only accept the complete kit as we originally sent it to you.
